Granite bases, with their excellent stability and corrosion resistance, play a key role in many areas, such as mechanical manufacturing and optical instrumentation, providing solid support for equipment. To fully utilize the advantages of granite bases, it’s crucial to select the correct size and maintain proper cleaning.
Granite Base Size Selection
Based on Equipment Weight and Center of Gravity
When selecting the size of a granite base, the weight and center of gravity of the equipment are key considerations. Heavier equipment requires a larger base to distribute the pressure and ensure that the base can withstand the weight without damage or deformation. If the center of gravity of the equipment is relatively good, to ensure stability, the base must have both sufficient surface area and appropriate thickness to lower the center of gravity and prevent the equipment from tipping over during use. For example, large precision machining equipment often has a wide and thick base to provide adequate support and stability.
Considering Equipment Installation Space
The size of the equipment installation space directly limits the size of the granite base. When planning the installation location, accurately measure the length, width, and height of the available space to ensure the base can be easily positioned and that there is ample clearance for operation and maintenance. Consider the relative position of the equipment and surrounding facilities to avoid disrupting the normal operation of other equipment due to an oversized base.
Consider the equipment’s motion requirements
If the equipment has moving parts during operation, such as rotating or moving parts, the granite base size should be selected to meet the equipment’s range of motion. The base should provide ample space for the equipment’s moving parts to operate freely and smoothly, without being restricted by the base’s boundaries. For example, for machine tools with rotary tables, the base size must accommodate the table’s rotational trajectory to ensure stable operation under all operating conditions.
Reference Industry Experience and Standards
Different industries may have specific experience and standards for granite base size selection. Consult with industry experts or refer to relevant technical literature and specifications to understand the granite base size range used for similar equipment and make the appropriate selection based on the specific needs of your equipment. This ensures the correct and accurate size selection while ensuring the normal operation of the equipment.
Granite Base Cleaning
Daily Surface Cleaning
During daily use, granite base surfaces easily accumulate dust and debris. Use a clean, soft cloth or feather duster to gently brush away any dust. Avoid using rough cloths or hard-bristled brushes, as they may scratch the granite surface. For stubborn dust, dampen a soft cloth, wring it out thoroughly, and gently wipe the surface. Dry immediately with a dry cloth to prevent residual moisture and stains.
Stain Removal
If the granite base is stained with oil, ink, or other stains, choose an appropriate cleaner based on the nature of the stain. For oil stains, use a neutral detergent or a stone cleaner. Apply the cleaner to the stain and wait a few minutes for it to penetrate and break down the oil. Then, gently wipe with a soft cloth, rinse thoroughly with water, and dry. For stains like ink, try using alcohol or hydrogen peroxide. However, be sure to test the solution on a small, inconspicuous area before applying it to a larger area.
Regular Deep Maintenance
In addition to daily cleaning, your granite base should also be regularly maintained. You can use a high-quality stone care agent to apply and polish the surface of the base. The care agent can form a protective film on the granite surface, enhancing its resistance to corrosion and improving the surface gloss. When applying the care agent, follow the product instructions and ensure it is applied evenly. When polishing, use a soft polishing cloth and apply the polish with appropriate pressure to restore the base surface to its bright and new state.
Post time: Sep-09-2025