Shandong Granite Platform Floor – Cleaning and Maintenance Guide

Granite floors are durable, elegant, and widely used in both commercial and industrial environments. However, proper cleaning and maintenance are essential to preserve their appearance, ensure safety, and maintain long-term performance. Below is a complete guide to daily cleaning and periodic maintenance of granite platform floors.

1. Daily Cleaning Tips for Granite Floors

  1. Dust Removal
    Use a professional dust mop sprayed with a stone-safe dust control solution. Push dust in overlapping strokes to avoid scattering debris. For localized contamination, use a slightly damp mop with clean water.

  2. Spot Cleaning for Minor Spills
    Wipe up water or light dirt immediately with a damp mop or microfiber cloth. This prevents stains from penetrating the surface.

  3. Removing Stubborn Stains
    For ink, gum, or other colored contaminants, promptly place a clean, slightly damp cotton cloth over the stain and gently press to absorb. Repeat several times until the stain lifts. For better results, leave a weighted damp cloth over the area for a short period.

  4. Avoid Harsh Cleaners
    Do not use soap powder, dishwashing liquid, or alkaline/acidic cleaning agents. Instead, use a neutral pH stone cleaner. Ensure the mop is wrung dry before use to prevent water spots. For deep cleaning, use a floor scrubbing machine with a white polishing pad and neutral detergent, then remove excess water with a wet vacuum.

  5. Winter Maintenance Tip
    Place water-absorbent mats at entrances to reduce moisture and dirt from foot traffic. Keep cleaning tools ready for immediate stain removal. In high-traffic areas, scrub the floor once a week.

precision granite work table

2. Periodic Maintenance for Granite Floors

  1. Wax Maintenance
    Three months after the initial full-surface waxing, reapply wax to high-wear areas and polish to extend the protective layer’s lifespan.

  2. Polishing in High-Traffic Areas
    For stone-polished floors, perform nightly polishing in entryways and elevator areas to maintain a high-gloss finish.

  3. Re-Waxing Schedule
    Every 8–10 months, strip the old wax or perform a full cleaning before applying a new coat of wax for maximum protection and shine.

Key Maintenance Rules

  • Always clean spills immediately to prevent staining.

  • Use only stone-safe, neutral pH cleaning agents.

  • Avoid dragging heavy objects across the surface to prevent scratches.

  • Implement a regular cleaning and polishing schedule to keep the granite floor looking new.

Conclusion
Proper cleaning and maintenance not only enhance the beauty of your granite platform floor but also extend its service life. By following these daily and periodic care guidelines, you can ensure your granite floors remain in top condition for years to come.


Post time: Aug-11-2025