Why granite air bearings are used in ultra-precision motion
Air bearings provide non-contact motion with extremely low friction, minimal wear and high repeatability. When the bearing structure is made from precision granite, the system also gains high dimensional stability, strong vibration damping and excellent long-term accuracy.
Granite air bearings are commonly used in:
- • Semiconductor inspection and wafer handling equipment
- • CMM and vision measuring machines
- • Laser interferometer and optical inspection systems
- • Ultra-precision linear and rotary stages
- • AOI, industrial CT and high-end metrology platforms
- • Air-bearing XY tables and linear motor stages
In these applications, the granite component is not only a structural base. It often serves as a precision datum, a motion reference surface and a stable platform for sensitive measurement.
What makes granite suitable for air bearings
Precision granite air bearings rely on several material properties working together.
High density and structural stability
ZHHIMG uses high-density black granite with a density of approximately 3,100 kg/m³. High density helps provide a stable, uniform structure for precision grinding, assembly and long-term use.
Low thermal expansion
Granite has relatively low and stable thermal expansion. This reduces dimensional drift when temperature fluctuates within a controlled environment. For nanometer-level motion, even small thermal changes can affect accuracy.
High vibration damping
Granite naturally absorbs vibration better than many metallic materials. This helps stabilize motion during high-speed scanning, long-exposure optical inspection and sensitive semiconductor measurement.
Non-magnetic and corrosion resistant
Granite does not rust and is not affected by magnetic fields. This makes it suitable for clean environments, optical systems and applications where metallic contamination or magnetic interference must be avoided.
Key design factors for granite air bearings
A granite air bearing is not defined by material alone. Its performance depends on design, manufacturing and assembly quality.
Bearing surface flatness
The working surface must meet strict flatness requirements. Any local deviation can affect air film thickness, motion stability and load distribution.
Flatness is verified with calibrated instruments such as electronic levels, laser interferometers and autocollimators.
Surface finish and porosity control
Air-bearing surfaces require a controlled finish. The surface must be smooth enough to maintain a stable air film, but not so sealed that it prevents proper air distribution where required.
For porous air bearings, porosity uniformity is critical. For non-porous air bearings with discrete restrictors, surface flatness and hole precision become more important.
Structural rigidity and support
Granite is strong in compression but sensitive to impact and uneven support. The bearing structure must be designed with proper ribbing, thickness and support points to avoid deformation under load.
For large air-bearing tables, support layout is as important as surface accuracy.
Integration with motion components
Granite air bearings are often combined with:
- • Linear motors
- • Linear encoders
- • Laser interferometers
- • Air supply systems
- • Precision guideways
- • Vibration isolation mounts
The granite component must provide accurate mounting interfaces while maintaining its own dimensional stability.
Manufacturing process for precision granite air bearings
ZHHIMG manufactures granite air-bearing components using controlled processes designed for metrology and semiconductor applications.
Material selection
Raw granite is screened for density, uniformity and internal integrity. High-density black granite with a density of approximately 3,100 kg/m³ is selected for precision components.
Rough shaping
Large granite blanks are cut and shaped according to customer drawings. For components up to 20,000 mm in length and up to 100 tons in single-piece capacity, handling and stress control are carefully managed.
Precision grinding
Working surfaces are ground to required flatness and finish. Large-format grinding equipment allows consistent processing of long and heavy granite bases.
Machining of inserts and interfaces
Threaded inserts, mounting holes, air channels, datum features and handling interfaces are machined according to drawing requirements. Position accuracy is checked to ensure assembly compatibility.
Assembly in controlled environment
Precision granite air-bearing assemblies are built in temperature- and humidity-controlled workshops. This helps reduce measurement variation during inspection and assembly, especially for semiconductor and optical inspection applications.
Final inspection
Each component is inspected using calibrated instruments, including:
- • Electronic levels
- • Laser interferometers
- • Dial indicators
- • Roughness testers
- • Dimensional gauges
Calibration traceability is maintained through recognized metrology channels.
Typical applications
| Application | Why granite air bearings are used |
|---|
| Application | Why granite air bearings are used |
|---|---|
| Semiconductor inspection | High stability, non-magnetic, clean surface |
| CMM and vision systems | Stable reference for precision measurement |
| Laser and optical inspection | Low vibration, low thermal drift |
| Linear motor stages | Accurate datum for high-speed motion |
| Rotary air-bearing tables | High roundness and motion repeatability |
| AOI and industrial CT | Stable platform for sensitive imaging |
Granite air bearings are especially valuable when the equipment must maintain accuracy over long measurement cycles, high-speed scanning or repeated positioning.
Maintenance and handling
Granite air bearings are durable, but they are not maintenance-free.
Recommended practices:
- • Keep the working surface clean and dry
- • Use filtered air supply according to design requirements
- • Avoid impact on edges and bearing surfaces
- • Follow recommended support and mounting conditions
- • Perform regular flatness and motion accuracy checks
- • Use protective covers when the equipment is not in use
If accuracy drifts after long-term use, resurfacing or re-inspection may be required. ZHHIMG provides resurfacing and repair services for granite plates and granite bases.
How ZHHIMG supports granite air-bearing projects
ZHHIMG supplies precision granite components for metrology, semiconductor and optical inspection equipment.
Our capability includes:
- • Granite surface plates and reference components
- • Granite machine bases and granite assemblies
- • Granite air bearings and air-bearing tables
- • Large-format granite components up to 20,000 mm
- • Single-piece capacity up to 100 tons
- • Resurfacing, repair and calibration support
We work from customer drawings and can manufacture granite air-bearing structures with threaded inserts, mounting interfaces, datum features and handling points. Inspection is carried out in temperature- and humidity-controlled environments using calibrated measurement equipment.
FAQ: precision granite air bearings
What is a granite air bearing?
A granite air bearing is a precision motion or reference component made from high-stability granite. It uses an air film to provide low-friction, high-precision motion or a stable datum surface for measurement equipment.
Is granite better than metal for air bearings?
Granite is often preferred for metrology, semiconductor and optical applications because of its high stability, low thermal expansion and vibration damping. Metal air bearings may be chosen when high strength, complex machining or specific thermal requirements are needed.
Can ZHHIMG supply complete air-bearing systems?
We supply precision granite air-bearing components, granite assemblies and granite bases according to customer drawings. System integration with air supply, motors, encoders and control units should be confirmed based on project requirements.
What accuracy can granite air bearings achieve?
Accuracy depends on design, manufacturing, assembly, air supply and environmental conditions. Granite provides a stable base, but final motion accuracy must be verified at system level.
Do granite air bearings require special maintenance?
They require clean air supply, careful handling and regular inspection. The granite surface should be protected from impact, contamination and uneven support.
Post time: Nov-18-2026
