Single Side Vertical Balancing Machine YLD-300 (500,5000)

1. Introduction of YLD series products

This series is very cabinet single side vertical dynamic balancing machine has been produced for 300-5000kg, this machine is suitable for the disk rotating parts in a single side forward motion balance check, heavy flywheel, pulley, water pump impeller, special motor and other parts. The weight of the workpiece the equipment is pneumatic or hydraulic clamping workpiece, because the equipment is large diameter so the software has an Angle tracking function. Industrial control computer for data processing, color screen real-time display of unbalanced value, phase Angle and real-time speed, and equipped with industrial cabinet, and mechanical parts of the balance machine system, easy to save parameters, printing, high precision system test, reliable use, easy maintenance, more advanced than other test systems. And according to the customer's workpiece for customers to customize a variety of special fixture.

2. Measurement system

Industrial control computer, 19 "LCD display (can be customized with touch screen), Windows operating platform

★ more than 300 kg vertical balance machine with the company's independent development with Angle tracking function of the balance measurement system. The functions of the software cover all the functions of the domestic mainstream balancing machine software, the operation is all Chinese menu structure, operating steps text prompt; Large vertical balancing machine with Angle and tracking function of the vertical machine software

★ measuring system performance is strong: arbitrary workpiece calibration, measuring speed range wide 80 RPM starting, measuring speed block, unbalance amplitude and phase stability, high deweighting rate, high sensitivity

★ software with allowable unbalance calculator, the operator only needs to input the allowable vibration of the workpiece precision level, mass, working speed, and radius click to calculate the number of grams to allow the remaining unbalance of the workpiece

★ software completely independent development, according to customer requirements to modify or add software functions (such as scanning the two-dimensional code to add the workpiece identity name to the measurement results to save for future quality investigation)

Please contact the manufacturer for details of the software functions

3. Mechanical parts and controls

★ the equipment USES casting base, vertical support, spindle and support, the equipment has enough rigidity and stability

★ spindle using 45# carbon structure steel, after forging, quenching, fine grinding, axial and radial runout are controlled; High precision bearings make the equipment run more smoothly

★ power transmission adopts multi-wedge belt, stable and reliable transmission, small impact on balance measurement

★ set up a communication connection between the spindle and the measuring system, can realize the spindle Angle with tracer to facilitate the workpiece unbalance to find

★ spindle with hollow structure, easy to connect pneumatic or hydraulic clamping.

★ reliable quality of equipment, the use of frequency conversion speed control system, motor soft start soft stop on the impact of the equipment is small, extended the service life of the equipment. Equipment can work continuously, maintenance is simple and convenient

Note: please contact us for more information about the equipment

Manufacturer standard configuration parameters

Equipment model ldl-300a ldl-500a ldl-5000a

The workpiece quality range is kg 15-300 25-500 300-5000

Workpiece diameter mm Φ Φ Φ 1400 1200 1100

Equilibrium speed r/min 80-700 80-700 80-700

Minimum residual unbalance ≤3gmm/kg ≤3gmm/kg ≤3gmm/kg

Unbalance reduction rate % ≥90% ≥90%

Motor power 5.5kw 7.5kw 30KW

Clamping clamping pneumatic clamping hydraulic clamping

★ the above is the factory standard configuration equipment parameters. We support product determination, according to the needs of the customer to the equipment structure of the corresponding equipment allowed to change

★ the manufacturer provides the workpiece in the balance machine balance when the use of customized services

★ equipment can be added without affecting the measurement of performance of reasonable accessories, such as protection